Constructing Genesis
Testing the Electronics
My Genesis
Camera Genesis Manual The
Parts Kit The Lower Card The
Upper Card Testing Case
Assembly Case Assembly 2 First Light
Users
| It's time to begin setting the Voltage levels and Testing the Boards | |
| In this image you can see the Last voltage being set. Everything worked by the book and the voltages were very easy to set. |
|
| At this point the CCD has been installed and 2 images taken and subtract as per the manual. The STD Dev on mine was at 11.3. Night Vision mode was turned on |
|
| Same Processing without Night Vision |
|
| This was the actual images from the SAVE A |
|
| This was the Image from the SAVE B |
|
|
And this is the images after issuing the SUB A 1000 VISU 1200 800 commands |
|
